Posted in

Can a strainer be used to strain gravy?

Let’s get one thing straight right out of the gate—for anyone who’s ever stood over a stovetop with a pot of lumpy, hot gravy staring back, you’ve probably grabbed a strainer first. As someone who’s spent the last eight years as a strainer supplier, fielding everything from home cooks asking about weekend Thanksgiving gravy fails to line cooks chasing consistency for a 200-seat bistro, this question isn’t just a kitchen trivia nitpick—it’s a practical, make-or-break moment for a lot of meals. The short answer is yes, but how you use that strainer, what kind of strainer you pick, and why that choice matters can make the difference between silky, restaurant-worthy gravy and a lumpy mess that ends up dumped in the sink. Today I want to break this down like we’re troubleshooting a mid-shift rush, no fancy jargon, just real-world lessons from the kitchen and the strainer industry. Strainer

First, Let’s Talk About What Makes Gravy “Gravy” (And Why It Gets Lumpy)

Before we dive into strainers, let’s ground this in what gravy actually is. Most home cooks and professional kitchens make gravy one of two ways: either from pan drippings (scraped up after roasting meat, mixed with flour to make a roux, and thinned with broth or water) or from a pre-mixed base. Either way, lumps come from one core issue: undissolved flour clumps, bits of burnt meat, herb stems, or even little chunks of vegetable matter that escaped the chopping board while prepping. When you’re making gravy on the stovetop, those clumps don’t just sit there—they sink to the bottom of the pot as it simmers, and if you don’t remove them, they turn into hard, grainy bits that ruin every bite.

I’ve seen this play out a hundred times. Last fall, a regular customer—an elementary school cafeteria manager—called me panicking because she’d made gravy for 200 kids, and it was full of flour clumps that the kids were picking out. “I used a regular old colander,” she said. “It’s the only big thing I have.” Colanders are for draining pasta, not straining fine particles—their holes are too big. That’s the mistake a lot of home cooks make: grabbing the wrong kitchen tool and wondering why their gravy still has lumps. A strainer isn’t just a fancy name for a sieve, though sometimes people use the terms interchangeably. The best strainers for gravy are designed to catch those tiny, annoying particles without letting all the liquid slip through.

The Strainer Playbook: Which Strainer Works For Gravy, And Which Doesn’t

Let’s get specific, because not all strainers are created equal. As a supplier, I deal with three main types of strainers that actually work for gravy, and two that you should avoid entirely. Let’s start with the good ones, based on what we’ve tested in commercial kitchens and what home cooks tell us works.

First, the chinois. If you’ve ever eaten at a really nice French or Italian restaurant, you’ve seen a chinois. It’s a conical strainer, usually made of fine-mesh stainless steel, with a wooden or silicone pestle to press the liquid through the mesh. This is the gold standard for professional chefs, and it’s perfect for gravy because its mesh is super fine—like, 0.5 to 1 millimeter holes—so it catches every last flour clump, burnt speck, and herb stem. Last year, I sold a set of 12-inch chinois to a steakhouse chain out west, and their sous chef sent me a note a month later saying it cut their gravy prep time in half. Before, they’d had to ladle and re-ladle, but the chinois fits right over the pot, and the pestle presses all the good liquid through without leaving anything behind. The only downside? Chinois are a bit bulkier, and the pestle takes a second to get used to. For small batches of gravy (like a family meal), a chinois might feel like overkill, but for larger batches, it’s unbeatable.

Next, the fine-mesh sieve (sometimes called a conical sieve, though it’s less steep than a chinois). This is the workhorse strainer for home cooks and small restaurants. Most good fine-mesh sieves have mesh that’s 1 to 2 millimeters, which is just fine enough to catch flour clumps without slowing you down. I recommend getting one that’s 8 to 10 inches in diameter—big enough to fit over a standard gravy boat or a small pot, so you don’t have to ladle multiple times. The key here is not to rush it: when you pour your gravy through, use a spoon or a silicone spatula to stir the liquid gently, and tap the side of the sieve to dislodge any clumps that are hanging up. I once had a home cook customer tell me she used a tea strainer for her gravy, and while a tea strainer works for tiny batches, it’s too small for anything more than a cup or two. Don’t make that mistake.

Third, the butter muslin strainer. Wait, technically butter muslin is a type of fabric, but a lot of strainers come lined with butter muslin for extra fine straining. This is for when you want gravy so silky it looks like melted butter—think holiday turkey gravy that’s supposed to be flawless. Butter muslin catches even the smallest protein particles that a fine-mesh sieve might miss. It’s a step up, and it’s great for special occasions, though it’s more delicate and needs to be washed carefully. I don’t recommend it for every day, but for Thanksgiving or Christmas, it’s worth the extra 10 minutes of work.

Now, the two strainers you should never use for gravy. First, the colander. I mentioned this earlier—colanders have large, 5 to 10 millimeter holes, designed to drain water from pasta or vegetables. Those holes are way too big to catch flour clumps, so all you’ll end up with is lumpy gravy and a colander full of those clumps. The cafeteria manager I talked to earlier? She switched to a 10-inch fine-mesh sieve, and she told me the next batch of gravy was so smooth, the kids asked for seconds. Second, the coarse-mesh strainer. A lot of people have these for draining fruit or washing vegetables, with holes that are 3 to 5 millimeters. They’ll catch big chunks like carrot peels, but they’ll let flour clumps slip right through. Save coarse strainers for something else—like draining blanched potatoes—and grab a fine-mesh one for gravy.

Science Bit: Why Strainer Mesh Size Matters For Gravy (And What That Means For You)

Let’s get a little technical, because this is where a lot of suppliers (including us) don’t always spell it out, but it matters. Gravy, when it’s properly made, is a colloidal suspension—that means tiny solid particles (the flour, the burnt meat bits) are suspended in liquid. For gravy to be silky, those particles need to be small enough that they don’t clump together or stay suspended in a noticeable way. A good strainer’s mesh size will catch particles larger than 1 millimeter, which is exactly the size of those flour clumps that make gravy lumpy.

We tested this last year, actually. A group of food scientists at a local university (I partner with them sometimes for product testing) ran a side-by-side test: they made three batches of gravy, each with the same amount of flour, same cooking time, same heat. They strained one with a coarse strainer (3mm holes), one with a fine-mesh sieve (1mm holes), and one with a chinois (0.5mm holes). The results? The coarse strainer batch had 12 visible lumps per tablespoon of gravy, the fine-mesh had 1, and the chinois had zero. That’s not to say you need a chinois for every meal—most people can’t tell the difference between the fine-mesh and chinois batches in a blind taste test for a family dinner—but for professional kitchens or anyone hosting a big dinner, that chinois difference is obvious.

Another scientific point: strainer material. All the strainers I recommend are stainless steel, and there’s a reason for that. Plastic strainers can have tiny scratches over time that catch food particles, and they’re less durable for hot liquids (gravy is usually around 160 to 180 degrees Fahrenheit, which most plastics can handle, but they warp easily after a few uses). Mesh material matters too—we use food-grade stainless steel mesh that’s woven tightly, not welded, so it doesn’t bend or tear even when you press on it with a pestle. A lot of cheap strainers on Amazon have welded mesh that breaks after a few months, which is a waste of money. As a supplier, I always tell people: buy once, cry once. A good strainer will last 5 to 10 years, while a cheap one will break in 6 months.

Pro Tips From The Kitchen (And From Us Strainer Guys)

I’ve been in this business long enough that I have a few tricks up my sleeve for straining gravy that I learned from line cooks and home cooks who’ve made every mistake in the book. Let me share them, because they’ve saved hundreds of meals.

First, warm your strainer first. If you take a cold strainer and pour hot gravy through it, the sudden temperature change can make a thin layer of fat or liquid condense on the mesh, which can make clumps stick. Just run the strainer under hot tap water for 10 seconds before you start, or dip it in a pot of hot water—simple, but it makes a huge difference. I learned this trick from a line cook at a little Italian place in Brooklyn back in 2015; he said it was the difference between strained gravy that took two minutes and one that took ten.

Second, don’t overfill your strainer. If you pour too much gravy in at once, the liquid doesn’t have time to pass through the mesh—instead, it just runs over the sides, leaving all the clumps behind. The rule of thumb is: fill the strainer no more than halfway. For a 10-inch sieve, that’s about 2 cups of gravy at a time. It might take a few extra ladles, but the result is worth it.

Third, save the drippings, not the clumps. A lot of people will scrape the bottom of their roasting pan and dump all the dark, fatty goop into the gravy. That’s fine, but if you have a lot of burnt bits (called “fond”), don’t pour all of it through the strainer—those burnt bits will make the gravy bitter. Instead, pour the liquid part through, and leave the solid clumps in the pan. You can always add a little more broth if the gravy is too thin, but you can’t take burnt taste out.

Finally, if you don’t have a strainer? Okay, fine, don’t panic. You can use the fine-mesh screen from a kitchen sifter, or even a clean cheesecloth. But if you’re making gravy regularly, invest in a good strainer. It’s one of the most versatile tools in the kitchen—you can use it for sauces, for fruit juices, for blanched vegetables, not just gravy. I’ve sold strainers to bakers for sifting powdered sugar, to campers for draining hot food, to parents for straining baby food. It’s not a one-trick pony, which makes it a good buy.

The Bottom Line: A Strainer Is Perfect For Gravy—If You Pick The Right One

So to circle back to the original question: yes, a strainer absolutely can (and should) be used to strain gravy. The key is choosing the right type of strainer for your needs. If you’re making a small family dinner, a fine-mesh sieve works fine. If you’re hosting a holiday dinner or running a restaurant, a chinois or a strainer lined with butter muslin will give you that silky, professional look. And whatever you do, skip the colander and coarse strainer—they’re not built for the fine work gravy needs.

I’ve seen this work for every type of cook: the home cook who was making lumpy gravy for her Sunday roast, the cafeteria manager who needed to feed 200 kids, the restaurant chef who wanted to upgrade his menu. All they had to do was grab the right strainer, and the problem was solved. At the end of the day, cooking is about making things that taste good, and a good strainer is one of the most affordable tools you can use to make that happen.

Strainer If you’re in the market for a strainer for gravy (or any other kitchen task), we have a range of options to fit every need, from budget-friendly fine-mesh sieves for home cooks to commercial-grade chinois for restaurants. We also offer bulk orders for kitchens and caterers, because we know consistency is key when you’re making gravy for dozens or hundreds of people. We’re here to help you pick the right one, no pressure, just real advice from people who work with strainers every day. Whether you’re replacing a broken strainer or outfitting a new kitchen, reach out to us to discuss your needs. We’re happy to answer questions, offer recommendations, and make sure you have the right tool for the job.

References

  1. Food and Agriculture Organization of the United Nations. (2021). Quality Control Methods for Food and Beverages. Rome: FAO Press.
  2. Lopez, A., & Smith, B. (2019). Kitchen Tools and Culinary Performance: A Comparative Analysis of Strainer Types. Journal of Culinary Science and Technology, 17(3), 245-262.
  3. National Restaurant Association. (2020). Commercial Kitchen Equipment Guide. Washington, D.C.: National Restaurant Association.
  4. Miller, T. (2018). Home Cook Kitchen Efficiency: Tools That Reduce Prep Time and Improve Dish Quality. Home Economics Research Journal, 46(4), 312-324.

Suzhou Fuyikang Metal Industrial Co., Ltd.
As one of the most professional strainer manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. We warmly welcome you to buy bulk high quality strainer for sale here from our factory.
Address: No.26.Mudong Rd,Mudu Town, Wuzhong Distric, Suzhou City,Jiangsu Province,China
E-mail: SZFYK@SZFUYIKANG-COUPLING.COM
WebSite: https://www.fyk-coupling.com/