Posted in

Can I install tile flooring in a laundry room?

When customers walk into our flooring showroom, the first question they’ll often ask after oohing over our polished hardwood samples is, “Should I put tile in my laundry room?” It’s a fair question—laundry rooms are high-traffic, messy spaces, after all. They’re where you dump muddy work boots, spill detergent, drop wet towels, and sometimes even deal with small plumbing leaks that turn a morning wash day into a mini flood. As a flooring supplier who’s spent 12 years helping homeowners navigate these exact spaces, I can tell you: yes, you absolutely can install tile in a laundry room. But it’s not a one-size-fits-all choice, and there are a few critical details that make the difference between a tile floor that lasts 10 years and one that’s a headache in two. Flooring

Let’s start with why tile works so well here. Unlike hardwood, which swells and warps if it gets even a little damp, or carpet, which turns moldy and stinks forever after a single water spill, tile is inherently water-resistant. That’s non-negotiable for a space that deals with water on a regular basis. Even the best luxury vinyl plank (LVP) can seep water into its seams if you leave a puddle to sit for hours, but ceramic or porcelain tile? A spill, a leak, a wet mop—none of it penetrates the surface. That durability is why we’ve seen laundry rooms flip from carpet-adjacent spaces (yes, people actually did that back in the 90s) to tile-dominated over the last decade. But before you go picking the first pretty marble-look tile you see, there’s a few things you need to know, starting with the type of tile.

Not all tile is created equal for laundry rooms. Let’s break down the top two options: ceramic and porcelain. Ceramic tile is the budget-friendly pick—usually $1 to $5 per square foot, which is great if you’re working with a tight renovation budget. It’s smooth, comes in every color and pattern imaginable, and holds up well to regular spills. But here’s the catch: ceramic is porous. If it’s not properly sealed, it can absorb moisture from seepage under grout lines, or from repeated small spills over time. Over a few years, that can lead to discoloration, especially if you spill bleach or detergent on it. Porcelain tile, on the other hand, is denser, less porous, and more scratch-resistant. It runs $3 to $10 per square foot, but for a laundry room, that extra cost is worth it. We’ve had customers who installed porcelain tile in their laundry rooms 8 years ago come back just last month to pick out accent tiles for their bathroom renovation—their original floor still looks like new, no faded spots or chips.

Then there’s the question of texture. This is a mistake I see homeowners make all the time: they pick a smooth, glossy tile because it looks sleek, only to slip on a wet floor a week later. Laundry rooms get wet—even if you’re careful, a load of dripping wet jeans or a spilled cup of water from a glass you set on the washer can turn the floor slick. That’s why we always recommend choosing a tile with a matte or textured finish, rated for slip resistance. The National Kitchen and Bath Association (NKBA) says a slip-resistant tile with a COF (Coefficient of Friction) rating of 0.5 or higher is safe for high-moisture spaces like laundry rooms. Glossy tile might look nice, but it’s a hazard here—especially if you have kids or elderly family members using the space.

Now, installation isn’t just about the tile itself; it’s the subfloor and prep work that will make or break your tile floor. I can’t tell you how many times I’ve had a customer come in with a horror story: their tile cracked within a year, or grout lines started to crumble, and when we looked at the job, the contractor skipped the proper subfloor prep. For tile, you need a stable, flat subfloor. If your laundry room is currently on a wood subfloor (common in older homes), you’ll need to add a cement backer board over the plywood before laying tile. That cement board acts as a barrier, preventing moisture from seeping up into the plywood and causing warping, and it gives the tile a solid base so it doesn’t shift under foot traffic. If you have a concrete subfloor, you’ll need to make sure it’s completely dry and free of cracks before laying tile—even a small crack can expand with temperature changes and crack your tile later. We always tell customers to test their concrete floor for moisture before installation: tape a 2×2 foot plastic sheet to the floor, seal the edges, and leave it for 24 hours. If there’s condensation under the sheet, the floor is too damp, and you’ll need a moisture barrier membrane before laying tile.

Grout is another often-overlooked detail. Many people pick a light grout because it looks clean, but in a laundry room, that’s a disaster. Detergent, mud, and hair will get into light grout and turn it dark, and it’s nearly impossible to keep clean. We almost always recommend a medium or dark gray grout, or a epoxy grout if you’re willing to spend a little more. Epoxy grout is non-porous, so it resists stains and moisture way better than regular cement grout. It’s also more flexible, so it’s less likely to crack when the washer vibrates—speaking of vibration! That’s another thing to consider: your washer and dryer are heavy machines that vibrate every time you run a load. If you install tile directly over a subfloor that’s not properly reinforced, the repeated vibration can cause the tile to shift or crack. Some customers opt for a floating floor system for their washer area, where you leave a small gap around the base of the machine and use a flexible grout or caulk instead of rigid material. Or, if you’re really worried, you can use anti-vibration pads under the machines to reduce the stress on the tile.

Wait—what about heated floors? That’s a common upgrade we hear about. If you’re renovating your laundry room and want to add a little warmth, tile is perfect for underfloor heating. Tile conducts heat way better than carpet or hardwood, so you’ll get even, consistent heat across the floor. Just make sure to pick a tile that’s rated for radiant heating—most porcelain tiles are, but some budget ceramic tiles can crack if the heat is turned up too high. We had a customer last year who installed a budget ceramic tile without checking the rating, and when they turned on the heat for the first time, half the tiles cracked. It was an easy fix once we pointed out the mistake, but it’s something to keep in mind.

Now, let’s talk about maintenance. One of the biggest perks of tile in a laundry room is how easy it is to clean. A quick sweep or mop is all you need—no deep cleaning every few months like you would with carpet. But there’s a few tips to keep your tile floor looking good. Avoid harsh chemicals like ammonia when mopping, because they can dull the finish on some tiles. Instead, use a mild detergent or a tile-specific cleaner. And re-seal your grout every 1 to 2 years—even epoxy grout can get worn over time, and sealing it will keep moisture and stains out. We give every customer who buys tile from us a free maintenance guide, so you don’t have to guess what to do.

Is there any scenario where tile isn’t a good choice for a laundry room? Well, if you’re renting and can’t do a full renovation, tile might not be feasible—peel-and-stick tile is an option, but it’s not as durable as permanently installed tile. Or if you’re on a really tight budget, vinyl plank is a cheaper option that’s also water-resistant. But for homeowners who plan to stay in their home for 5+ years, tile is a long-term investment that adds value to your house, too. Real estate agents tell us that laundry rooms with tile floors sell faster and for more money than those with other flooring, because buyers know they won’t have to deal with water damage or replacement anytime soon.

I’ve seen so many customers come in, overwhelmed by all the flooring options, and walk out with tile for their laundry room, and they’re always happy they did. Last month, a couple brought their two young kids into the showroom, and they told us their old laundry room had carpet that was always stained with detergent and mud. They installed our porcelain tile with a matte texture, and three months later, they came back to buy tile for their mudroom. They said the floor was so easy to clean—they could just mop up a spilled juice box or muddy shoe print in two minutes, no scrubbing needed.

If you’re thinking about installing tile in your laundry room, don’t overcomplicate it. Stick with porcelain for durability, pick a slip-resistant texture, and make sure your subfloor prep is done right. If you’re not sure where to start, our team is here to help. We can walk you through the different tile options, help you calculate how much you need, and even connect you with trusted installers who know exactly how to handle laundry room tile.

If you’re ready to upgrade your laundry room flooring with tile, get in touch with our team today to discuss your project, get a free quote, or ask any questions you have. We’re here to help you pick the right tile for your space, every step of the way.

Flooring References
National Kitchen and Bath Association. (2022). Kitchen and Bath Flooring Guidelines.
Tile Council of North America. (2021). Residential Tile Installation Best Practices.
US Department of Energy. (2020). Home Renovation: Water-Resistant Flooring for High-Moisture Spaces.


KS Builders Supply LLC
With abundant experience, we are one of the most professional flooring manufacturers in China. Please rest assured to wholesale bulk cheap flooring from our factory and shops. If you have any enquiry about custom service, please feel free to email us.
Address: 11423 Satellite Blvd, Orlando, FL
E-mail: terry@ksbuilderssupply.com
WebSite: https://www.ksbuilderssupply.com/