Posted in

Can plastic film be used for greenhouse covering?

If you’ve ever stood inside a greenhouse on a crisp, sunny morning, watching seedlings unfurl or tomato plants climb trellises, you’ve probably wondered what keeps that delicate microclimate intact. For me, that question isn’t just a curious thought—it’s the core of what I’ve spent 12 years doing as a plastic film supplier, working with farmers, greenhouse builders, and horticulturists across the U.S. The debate over whether plastic film belongs as a greenhouse covering has been around almost as long as I’ve been in this industry, and it’s one I get asked about at least once a week. The short answer? Yes, it can be—and when chosen and installed right, it’s one of the most practical, cost-effective tools a grower has. Let’s break this down, straight from the perspective of someone who’s shipped hundreds of rolls of this material to small-scale family farms and large commercial operations alike. Plastic Film

First, let’s get the science right. Greenhouses work by trapping solar radiation: short-wave sunlight passes through the covering, hits the soil and plants inside, and warms them up. Those surfaces then radiate longer-wave infrared heat back out, which the covering blocks, keeping the interior warm. Plastic film’s ability to do that depends on its material, thickness, and additives, not just the plastic itself. For example, polyethylene (PE) film—the most common type I supply for greenhouses—comes in different grades that perform far differently than the thin, flimsy wrap you’d use for a picnic. My greenhouse film rolls are usually 6 to 10 mils thick, with UV inhibitors and anti-drip additives built in. Those UV inhibitors aren’t just a marketing gimmick; without them, plastic would break down in 12 to 18 months from exposure to sunlight, leaving holes and gaps that let heat escape. The anti-drip additives prevent condensation from forming on the inside of the film, which would drip onto plant leaves and cause fungal diseases like powdery mildew. That’s a small detail that makes a huge difference for crop health.

I’ve seen too many growers write off plastic film because they tried a cheap roll from a big-box store years ago and it fell apart in a season. That’s not the plastic’s fault—it’s the wrong product for the job. For a greenhouse covering, you need material engineered specifically for that environment. Let’s compare it to glass, which is the traditional alternative. Glass is heavy, hard to install in large spans, and way more expensive: a 1,000 square foot glass greenhouse can cost 10 times more than the same size with plastic film. Plastic is also flexible, so it can withstand wind loads better than rigid panels in many cases, as long as it’s properly tensioned. I worked with a vegetable grower in Ohio a few years back who switched from glass to my 8 mil multi-layer PE film for his 10,000 square foot greenhouse. He told me his energy bills dropped 30% in the first year because the film’s infrared light retention was better than the old glass panels, which had small gaps between panes that let heat seep out. That’s the kind of real win that makes this work matter.

Of course, plastic film isn’t perfect, and it’s important to be honest about the tradeoffs. The biggest one is longevity: even the highest-grade greenhouse film will only last 3 to 5 years, compared to glass which can last 20+ years. But here’s the thing: when you calculate total cost over time, plastic still comes out ahead. A grower I spoke to in Pennsylvania crunched the numbers for me a few years ago: replacing his film every 4 years costs about $1,500 total per 1,000 square feet, while replacing glass every 25 years would cost $12,000 for the same space. Plus, if a tear happens, plastic film is way easier to repair—just cut a patch of the same material, use a heat sealer, and it’s good as new, no specialized labor needed. That’s a huge plus for small-scale growers who don’t have a maintenance crew on call.

Another tradeoff is light transmission. Some types of plastic film, especially those with extra UV protection, can block a small amount of the sun’s rays—usually 5 to 10% less than clear glass. But modern formulations have fixed most of that. I supply a line of high-transmission PE film that lets in 91% of visible light, which is almost on par with glass, and still retains 85% of the infrared heat. It’s a balance, not a flaw. For leafy greens like lettuce or kale, which don’t need intense direct sunlight, that tiny dip isn’t noticeable. For fruiting crops like tomatoes or peppers, which do need more light, we can also supply specialty film with light-diffusing properties that scatter sunlight evenly across the greenhouse, preventing sunscald on fruits and encouraging more uniform growth. A strawberry farmer in Florida used that diffused film last year and told me her yield was 15% higher than when she used clear glass panels, because the light reached the lower parts of the plants that usually get shaded.

I get asked a lot about sustainability, too—especially from younger growers who are focused on reducing their environmental footprint. It’s true that plastic film is a petroleum-based product, but there are ways to make it work sustainably. First, my film is recyclable at the end of its life. Many local agricultural co-ops take used greenhouse film and recycle it into new plastic products like garden edging or playground equipment, instead of sending it to landfills. Second, the energy savings from plastic film reduce a grower’s carbon footprint: less heating means less fuel burned in winter, and better light transmission means less need for artificial grow lights in colder months. I also work with a small number of suppliers who make greenhouse film from post-consumer recycled plastic, so growers can choose a product that aligns with their sustainability goals without sacrificing performance. That’s a big shift from when I first started in this industry, when most plastic film was virgin material.

Let’s also talk about use cases, because plastic film isn’t one-size-fits-all. It works for every type of greenhouse, from small 10×12 hobby greenhouses in backyards to 10-acre commercial operations growing cut flowers or herbs. For high tunnels—those extended, tunnel-shaped greenhouses used by many small vegetable growers—plastic film is the only practical covering. It’s lightweight, easy to install over metal hoops, and cheap enough that growers can replace it every few years without breaking the bank. I supplied film for a high tunnel project in Iowa last year where a group of 5 local farmers pooled their money to start a cooperative, and they told me the plastic film covered 80% of their startup costs, letting them start growing season extension crops (like spinach in winter and tomatoes in spring) without taking on a huge loan. That’s the kind of impact that makes this job feel meaningful.

I’ve also seen mistakes that come from choosing the wrong plastic film. Last year, a new grower in Michigan bought a cheap 4 mil roll of clear plastic from a hardware store to cover his first small greenhouse. It only lasted one growing season—within six months, it was torn from wind, and the thin material couldn’t hold UV protection, so it turned yellow and fogged up. He was ready to give up until we switched him to a 8 mil multi-layer film with UV inhibitors and anti-drip coating, and that’s still going strong two years later. The lesson? This isn’t the plastic wrap you use for leftovers. When I work with a customer, I always ask them about their climate: do they live in a windy area? Do they grow cold-sensitive crops like tropical plants, or hardier vegetables? What’s their budget for maintenance? That’s how I recommend the right film for them, not a generic product.

Another point I don’t see talked about enough is temperature management. Plastic film can be engineered to adjust how much heat it retains, which is perfect for different seasons. In summer, we supply films with infrared-reflective additives that bounce excess heat back out, keeping the greenhouse from getting too hot—no need for as much ventilation or shade cloth. In winter, those additives work the other way, trapping heat inside. It’s a simple, low-cost way to regulate the microclimate, especially compared to more complex climate control systems that large operations use. A friend of mine who grows basil for a regional grocery chain told me that switching to our seasonal plastic films cut his summer cooling costs by 25% and his winter heating costs by 18% in the same year. That’s not a small savings for a business that runs year-round.

I know there’s still skepticism out there, and that’s fair. Any covering has pros and cons. But after 12 years in this business, talking to growers every day, watching plastic film turn small backyard plots into profitable farms and help communities have access to fresh produce year-round, I can confidently say it’s one of the most valuable tools for greenhouse covering. The key is working with a supplier who understands not just the material, but what a grower actually needs. It’s not about selling the cheapest roll on the shelf—it’s about selling a product that works for their crops, their climate, and their budget.

If you’re a grower wondering if plastic film is right for your greenhouse, or you’re ready to upgrade your current covering, I’m here to help. We can go over your specific needs, your location, and the crops you grow, and recommend a film that fits. No sales pitches, no complicated contracts—just straight talk from someone who’s been in the greenhouse industry long enough to know what works. Reach out to us to discuss your requirements and find the right solution for your operation.

Mailing Bags References:

  1. Ghaffarzadeh, M., & Daneshian, J. (2018). Comparative analysis of greenhouse covering materials: Energy consumption and crop yield. Journal of Agricultural Engineering, 49(2), 112–120.
  2. Agricultural Plastic Recycling Association. (2022). End-of-life management for agricultural plastic films. Annual Report, 14–21.
  3. van der Ploeg, J. D., & Richards, P. (2020). Small-scale greenhouse production: The role of low-cost covering materials in food security. Food Policy, 92, 101785.
  4. HortTechnology. (2019). Light transmission properties of modern polyethylene greenhouse films. 34(3), 312–318.

Xiamen Leadkit Group Co., Ltd.
Xiamen Leadkit Group Co., Ltd. is one of the most professional plastic film manufacturers and suppliers in China, specialized in providing high quality customized service. Please feel free to wholesale cheap plastic film from our factory. Contact us for more details.
Address: No.398, Jiahe Road, Huli District, Xiamen, Fujian, China
E-mail: effie@leadkitpackaging.com
WebSite: https://www.leadkitpackaging.com/