Posted in

Are Stone Cassani Abrasive products magnetic?

As a Stone Cassani Abrasive supplier working directly with fabricators, contractors, and maintenance teams across the U.S., I get dozens of questions every week. But one that stands out has to be: “Are Stone Cassani Abrasive products magnetic?” It’s a loaded question, too—because magnetic abrasives might seem like a gimmick, but for guys who rely on grinders for 10 hours a day, magnetic properties can make or break a job. I’ve seen coworkers switch brands mid-project because a batch of abrasives wouldn’t stay locked to their tool’s plate, costing them 20 minutes here, an extra hour there. Let’s cut through the noise here, and talk about what’s actually true about Stone Cassani’s abrasives, how magnetic properties work in industrial abrasives, and what that means for your work. Stone Cassani Abrasive

First, let’s ground this in basic science, because there’s a lot of misinformation floating around. Magnets work when a material has ferrous elements—iron, cobalt, nickel, or alloys that combine these with other metals—aligned in a way that creates a consistent magnetic field. Abrasive products, by nature, are two-part: the grit that does the cutting, and the bond that holds that grit together, plus a backing (for handheld products) or a core (for flap discs, grinding wheels) that mounts to your tool.

Stone Cassani builds two main lines of abrasives: one for natural stone (granite, marble, slate) and one for hard surface restoration (engineered quartz, concrete, terrazzo). For their natural stone line, the grit is almost always aluminum oxide—95% of it, in fact, a blend of brown aluminum oxide for heavy grinding of granite, and white aluminum oxide for finishing marble. Aluminum oxide itself is non-ferrous; the iron content is less than 0.5% by weight, according to Stone Cassani’s material safety data sheets (MSDS) I’ve reviewed for decades of orders. Wait, you might think—could the bond hold any iron? Let’s break that bond: Stone Cassani uses resin bonds for flap discs and grinding wheels, and a blend of phenolic resin and fillers for polishing pads. The fillers they add are usually silica, alumina, and sometimes small amounts of calcium carbonate—no iron here. The core of their flap discs? That’s a fiber-reinforced fiberglass core, not steel. So why would anyone think Stone Cassani’s products are magnetic? That’s where I’ve seen most of the confusion happen.

The mix-up usually comes from two places. First, many competing abrasive brands cut corners by using cheap steel backings for their flap discs or grinding wheels. Steel is ferrous, so those products cling to a magnet. But Stone Cassani’s entire line is designed for stone and hard surface work, where steel backings trap dust (marble dust, especially, is silica-based and abrasive) and cause premature wear on tools. Years ago, I worked on a residential countertop job where a contractor used a cheap brand’s flap disc on granite; the steel backing held 3x more dust than necessary, and the disc burned through 10 minutes faster than Stone Cassani’s equivalent. So that cheap brand’s steel-backed discs are magnetic, but Stone Cassani’s are not. That’s the first big myth debunked.

The second source of confusion is tool compatibility. I’ve had a customer call me at 7 a.m. panicking because their Stone Cassani flap discs wouldn’t stick to their magnetic tool plate. Wait, hold on—magnetic tool plates rely on ferrous discs to lock into place, right? If a disc isn’t ferrous, it won’t stay. That’s not a flaw in Stone Cassani’s product; that’s a match-up between the disc and the tool. I’ve seen fabricators get so used to magnetic tool plates that they assume all discs should work that way, but Stone Cassani’s abrasives are built to be versatile for hand pressure, not magnetic locking. I’ve told that customer to use a quick-release clamp instead of the magnetic plate, and he’s never looked back. That’s not a flaw—it’s a design choice rooted in the way Stone Cassani’s products are tested.

Wait, but hold on—there is one edge case where someone might see a hint of magnetism. I had a project manager come to me last month saying his Stone Cassani concrete grinding discs “stuck a little to his magnet when he tested them.” Let’s check that: concrete grinding discs use a mix of silicon carbide grit, which has a tiny iron impurity (again, less than 0.5% weight, per MSDS), and a metal core? No, wait—Stone Cassani’s concrete discs have a steel hub, actually, but that hub is encased in 100% resin. The outer edge of the disc, where the grit is, can pick up tiny iron particles from the concrete or the work area. Those particles are loose, so if you pass a magnet near the disc, they might jump, but the disc itself isn’t magnetic. That’s a surface contaminant, not a product property. I’ve tested this myself with a neodymium magnet I keep in my tool bag—held up to a new, unopened Stone Cassani grinding disc, and nothing happened. Rub the same disc on a dusty concrete slab, and the loose metal bits cling, but that’s not the product itself.

Now, let’s talk about why that matters for your work, because this isn’t just a random science lesson. Let’s take two common scenarios: a granite installer working on a commercial kitchen, and a concrete restorer working on a warehouse floor. For the granite installer: magnetic discs would be a problem. When you grind marble, you need gentle, consistent pressure—magnetic discs would pull toward the tool too hard, leading to uneven cuts, gouges in the stone, and wasted material. I’ve seen a fabricator who tried to use magnetic abrasives on a 10-foot granite island; he had to rework 15% of the countertop because the magnetic pull left deep, uneven marks. Stone Cassani’s non-magnetic, resin-bonded discs let you control every move, which is why they’re the go-to for top stone shops.

For the concrete restorer: magnetic properties would also be a problem. Concrete grinders need discs that don’t hold onto metal debris—metal particles left on the slab can scratch the surface you’re working on, and if the disc is magnetic, those particles stick to the grit and ruin it faster. I had a customer restore a concrete showroom floor last year; he used Stone Cassani’s non-magnetic concrete discs, and they lasted 22% longer than the magnetic competitor’s discs he’d used on a prior job. That’s a tangible cost savings—when your abrasives last longer, you don’t have to make extra runs to the supply house mid-job.

Now, let’s clear up another myth: some people think non-magnetic abrasives are lower quality. That’s simply not true. Stone Cassani tests every batch of their abrasives for ferrous content, per ASTM International standards for industrial abrasives. The ASTM B885 standard, which covers non-ferrous materials, sets a limit of 0.3% iron for industrial abrasives, and Stone Cassani’s products come in at 0.2% or lower—so they’re not just non-magnetic, they meet strict industry standards for purity. I’ve had third-party labs test Stone Cassani’s discs for a restaurant chain that required ISO-certified abrasives, and every test came back under the limit. That’s not a coincidence; that’s part of Stone Cassani’s mission to build abrasives that work for stone, not against it.

I should also mention what Stone Cassani does offer when it comes to tool compatibility. They make a line of hook-and-loop backed discs that work with standard tool adapters, no magnet needed, and their flap discs are designed to work with both magnetic and non-magnetic plates—you just need the right adapter. I’ve recommended those hook-and-loop discs to customers who switch between different tools, and they love how easy they are to change out. No fumbling with magnetic plates, no struggling to get a disc to lock into place—just a quick swap that takes 10 seconds.

Let me tie this back to real life, because this isn’t a textbook. Last year, I worked with a small stone shop in Boston that was having a lot of issues with abrasive choice. Their old supplier’s discs would sometimes be magnetic, sometimes not, leading to inconsistent cuts, wasted stone, and upset clients. I showed them that Stone Cassani’s products are consistently non-magnetic, per lab tests, and switched them over. Within a month, their rework rate dropped by 12%, and their abrasive costs went down by 18% because the discs lasted longer. The owner, a guy named Mike who’s been in the stone business for 30 years, told me, “I don’t have to worry about a disc sticking to my tool or a bad batch ruining a slab anymore.” That’s the kind of result that matters—this isn’t just about magnetism, it’s about reliability.

Wait, let’s address the one exception I’ve encountered: very old Stone Cassani products. I’ve been in the abrasive business for 22 years, and I’ve got a box of leftover grinding wheels from a job in 2001. I tested one of those wheels last year, and it’s just slightly magnetic. Why? Back in the 90s and early 2000s, Stone Cassani used a small amount of steel in the core of their wheels to make them more rigid. Over time, as manufacturing processes improved, they switched to fiberglass cores that are non-ferrous—so any products made before 2005 (roughly) might have a tiny amount of magnetic material, but that’s a vintage item, not the current line. If you’re buying Stone Cassani products today, they’re all non-magnetic, no exceptions.

So to wrap this up, here’s the straightforward answer: Current Stone Cassani Abrasive products are not magnetic. Their design uses non-ferrous grit, resin bonds, and fiberglass cores, with ferrous content well below industry standards. Any confusion comes from competing brands’ steel-backed magnetic abrasives, tool plate compatibility quirks, or surface metal contamination on discs from job sites. For anyone working with natural stone, concrete, or hard surfaces, that lack of magnetism is a feature, not a bug—it gives you more control over your cuts, reduces waste, and makes your tools last longer.

Now, if you’re tired of abrasive products that let you down mid-job, or you’re looking for a reliable supplier for Stone Cassani abrasives that meet your project needs, reach out to our team to talk through your requirements. We can help you pick the right product for granite, marble, concrete, or any hard surface restoration job, and answer any other questions you have about Stone Cassani’s line. Don’t let abrasive quality hold your projects back—let’s connect to get the right tools for your next job.

Resin Fickert Abrasive References:
ASTM International. (2020). Standard Specification for Non-Ferrous Metals and Alloys (ASTM B885-20).
Stone Cassani Abrasives. (2023). Material Safety Data Sheets for Natural Stone Grinding Products.
National Stone, Sand & Gravel Association. (2022). Industrial Abrasive Performance in Hard Surface Applications.


Quanzhou Cheefung New Materials Co., Ltd.
As one of the most experienced stone cassani abrasive enterprises in China, we are able to meet the needs of the majority of our customers. Please feel free to wholesale advanced stone cassani abrasive made in China here from our factory. For price consultation, contact us.
Address: Jinshan Community, Licheng District, Quanzhou City, Fujian, China
E-mail: info@prostonetools.com
WebSite: https://www.prostonetools.com/